Formula and input notes
Repeated stations = ceil(ceil[run length ÷ spacing] + 1, then apply the entered allowance)
| Input | Practical note |
|---|---|
| Spacing | This is the Vinyl Fence Calculator layout value for spacing; confirm whether the drawing specifies clear or on-center spacing. |
Worked vinyl fence example
Vinyl Fence Calculator example: A 119.5-ft run at 8-ft spacing gives ceil(119.5 ÷ 8) + 1 = 16 layout stations. With 5% allowance, the estimate rounds to 17.
Use the count as a baseline
Use the spacing result to estimate panel stations, then count line, end, corner, and gate posts plus caps and hardware separately.
Posts, gates, and field conditions
Prefabricated panel width, routed posts, corners, gates, grade changes, rackability, and terminal assemblies change the count.
Questions specific to this calculation
What does one repeated station represent for vinyl fence?
Enter each straight run and use the actual panel width or post spacing for the chosen vinyl system.