Formula and input notes
Repeated stations = ceil(ceil[run length ÷ spacing] + 1, then apply the entered allowance)
| Input | Practical note |
|---|---|
| Spacing | This is the Privacy Fence Calculator layout value for spacing; confirm whether the drawing specifies clear or on-center spacing. |
Worked privacy fence example
Privacy Fence Calculator example: A 74.5-ft run at 8-ft spacing gives ceil(74.5 ÷ 8) + 1 = 11 layout stations. With 5% allowance, the estimate rounds to 12.
Use the count as a baseline
Treat the output as repeated post or panel stations and develop a separate bill for infill boards, rails, gates, fasteners, and concrete.
Posts, gates, and field conditions
Solid privacy surfaces attract wind; panel style, height, exposure, slope, gate loads, terminal posts, and local rules affect layout.
Questions specific to this calculation
What does one repeated station represent for privacy fence?
Use planned panel width or post spacing along each straight run and identify corners and gate openings before adding counts.